BASIC OPERATION
PLAYING DISCS
1)Connect the power cord into the player and power outlet.
2)Switch the power button on the rear panel to the “ON” position.
3)Press the power button on the front panel to turn on the player.
It takes about
4)Press 
on the front panel to open the disc tray.
5)Place a disc on the disc tray with the disc’s l label side facing up.
6)Press 
on the front panel to start Playback.
7)Press 
to end the playback.
8)Remove the disc and turn off the power.
Note:
Press 
twice to stop playback while playing a DVD disc.
PAUSE
1)Press 
to pause playback; press it again to resume the playback.
2)If a CD is set on pause mode over 20 minutes, the player automatically stops the disc playback. In order to resume the Playback, press the PLAY button.
DISPLAY
When playing a disc, press 
button to show the playback mode on the screen. Press it again to cancel the display.
COLOR TV SETUP
Switch the color system (NTSC/PAL) according to your TV.
If the color system of the TV is NTSC, press the 
button to set the player to “NTSC”. If it is
PAL, set the color system to “PAL”. If your TV complies with both NTSC and PAL color system, set your TV to “AUTO”.
VOLUME CONTROL
Use the volume knob on the amplifier or on the TV to adjust audio volume. Press the + button to increase the volume or - button to decrease the volume.
11
