Setting Up Your Scanner

Setting up your scanner is easy—just follow the simple steps in this book in the order listed below.

1.Unpack and choose a place for your scanner.2.Install the SCSI interface board, if necessary.3.Unlock the scanner.4.Set the SCSI ID number.5.Connect the scanner to your computer.6.Power on your system.7.Install the SCSI software.8.Install the scanner software.9.Install the creative software and view your electronic manuals.

If you purchased the optional transparency unit or auto document feeder, see “Using the Optional Equipment” on page 67 for installation instructions.

Unpack Your Scanner

Remove the scanner from the box, then remove the packing material from your scanner.

Save the packaging in case you need it later. Your EPSON Perfection 1200S comes with the items shown here.

 

scanner

Scanner Basics

 

 

SCSI

 

SCSI

interface

 

interface

board

 

cable

CD-ROM with driver,

 

CD-ROM with driver,

electronic manuals,

 

electronic manuals,

and creative software

 

and creative software

for Windows

 

for Macintosh

7