Acnodes 1200S ■Try adjusting the Gamma setting, If your scanned image is faint or has gaps, ■Make sure the document table glass is clean

If your scanned image is faint or has gaps . . .■Check the brightness. Decrease the software or driver’s brightness setting.■Try adjusting the Gamma setting.

■Check the condition of your original. If the document is damaged, dirty, or wrinkled, these imperfections will show up in your scan.

■Check that the document is placed flush against the document table.

86

If your scanned image is blurred or distorted . . .

■Check the position and condition of your document. Make sure the document is placed flat against the scanner’s document table glass. If only part of the image is blurred, part of your document may be wrinkled or warped.

■Make sure the document table glass is clean.

■Make sure the scanner is not tilted or placed on an unstable or uneven surface.