Acnodes 1200S If You’re Using a Macintosh, 7.Click OK to register the calibration setting, 8.The Setup completion dialog box appears. Click OK

You don’t need to change the screen calibration again so long as you continue to use the same monitor. If you don’t see the utility or if you need to recalibrate your screen at a later time, click EPSON TWAIN 4 in the Control Panel (click Start > Settings > Control Panel > EPSON TWAIN 4 from the Windows Desktop to access it). On the EPSON TWAIN 4 dialog box, click the Calibration button.

In the following window, move the slider to the right or left until the shades of the horizontal gray stripes appear similar. View the screen from a short distance. The gray stripes will not perfectly blend together; however, try to make the two tones match as closely as possible.

before calibration after calibration

7.Click OK to register the calibration setting.8.The Setup completion dialog box appears. Click OK.

9.Now you can install your creative software and view your electronic manuals as described on page 26.

If You’re Using a Macintosh . . .

If you are using Mac OS 8.1, you need to install the Macintosh Update before installing the scanner software. This is available online from the Apple web site. If you are using Mac OS 8.5 or later, check the Apple web site for any updates.

1.Turn on your scanner first. Then turn on your Macintosh and turn off any virus protection programs.

23