© Copyright 2011 Acnodes, Inc.
All r ights reserv ed. Product descr iption and produ ct specific ations
are sub ject to c hange without not ice. For latest product in formation,
please visit Acnode s’ we b si te a t ww w.acnodes. com.
PC 5150
15-inch touch panel PC
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909. 597.1939
16
RMC 7150
14” short depth rack server
3.3 Control Panel LEDs
The control panel located on the front of the RMC 7150 chassis has five LEDs. These LEDs provide you with critical information
related to different parts of the system. This section explains what each LED indicates when illuminated and any corrective
action you may need to take.
Overheat/Fan Fail
When this LED flashes it indicates a fan failure. When on continiously (on and not flashing) it indicates an overheat condition,
which may be caused by cables obstructing the airflow in the system or the ambient room temperature being too warm. Check
the routing of the cables and make sure all fans are present and operating normally. You should also check to make sure that
the chassis covers are installed. Finally, verify that the heatsinks are installed properly. This LED will remain flashing or on as
long as the overheat condition exists.
Indicates network activity on LAN2 when flashing.
Indicates network activity on LAN1 when flashing.
Channel activity for HDDs. This light indicates IDE drive activity when flashing.
Indicates power is being supplied to the system’s power supply units. This LED should normally be illuminated when the
system is operating.