Acnodes RMC 7150

All r ights reserv ed. Product descr iption and produ ct specific ations

are sub ject to c hange without not ice. For latest product in formation,

please visit Acnode s’ we b si te a t ww w.acnodes. com.

PC 5150

15-inch touch panel PC

14628 Central Blvd,

Chino, CA91710

tel:909.597.7588, fax:909. 597.1939

RMC 7150

14” short depth rack server

5.3 Connecting Cables

Now that the serverboard is installed, the next step is to connect the cables to the board. These include the data cables for the

peripherals and control panel and the power cables.

Connecting Data Cables

The cables used to transfer data from the peripheral devices have been carefully routed to prevent them from blocking the flow of

cooling air that moves through the system from the back. If you need to disconnect any of these cables, you should take care

to keep them routed as they were originally after reconnecting them.

The following data cables should be connected.

- DVD-ROM cable

- SATA drive cables

- Control Panel cable

Connecting Power Cables

It has a 24-pin primary power supply connector for connection to the ATX power supply. In addition, there are two 8-pin proces-

sor connectors that also must be connected to your power supply.