Acnodes RMC 7150

All r ights reserv ed. Product descr iption and produ ct specific ations

are sub ject to c hange without not ice. For latest product in formation,

please visit Acnode s’ we b si te a t ww w.acnodes. com.

PC 5150

15-inch touch panel PC

14628 Central Blvd,

Chino, CA91710

tel:909.597.7588, fax:909. 597.1939

RMC 7150

14” short depth rack server

CHAPTER 2

2.1 Overview

This chapter provides a quick setup checklist to get your RMC 7150 up and running. FOllowing the steps in the order given

should enable you to have the system operational within a minimal amount of time. This quick setup assumes that your

system has come to you with the processor and memory preinstalled. If your system is not already fully integrated with a

serverboard, processor, system memory etc., please turn to the chapter or section noted in each step for details on installing

specific components.

2.2 Unpacking the System

You should inspect the box the server was shipped in and note if it was damaged in any way. If the server itself shows

damage, you should file a damage claim with the carrier who delivered it.

Decide on a suitable location for the rack unit that will hold the server. It should be situated in a clean, dust-free area that is

well ventilated. Avoid areas where heat, electrical nose and electromagnetic fields are generated. You will also need it placed

near a grounded power outlet. Read the rack and server precations in the next section.

2.2 Preparing for Setup

The RMC 7150 does not ship with a rack rail hardware package as the system can be rack mounted without the use of rails.

An optional rack rail package is available if you wish to order from Acnodes. Follow the steps in the order given to complete

the installation process in a minimal amount of time. Please read this section in its entirety before you begin the installation

procdeure outlined in the sections that follow.