Acnodes RMC 7150

All r ights reserv ed. Product descr iption and produ ct specific ations

are sub ject to c hange without not ice. For latest product in formation,

please visit Acnode s’ we b si te a t ww w.acnodes. com.

PC 5150

15-inch touch panel PC

14628 Central Blvd,

Chino, CA91710

tel:909.597.7588, fax:909. 597.1939

RMC 7150

14” short depth rack server

5.10 Jumper Settings

Explain of Jumpers

To modify the operation of the serverboard, jumpers can be

used to chose between optional settings. Jumpers create

shorts between two pins to change the function of the

connector. Pin 1 identified with a square solder pad on the

printed circuit board. See the serverboard layout pages for

jumper locations.

CMOS Clear

JBT1 is used to clear CMDS (which will also clear any

passowrds.) Instead of pins, this jumper consists of contact

pads to prevent accidentally clearing the contents of CMOS.

To clear CMOS,

1. First power down the system and unplug the power

cord(s).

2. With the power disconnected, short the CMOS pads with

a metal object such as a small screwdriver.

3. Remove the screwdriver (or shorting device).

4. Reconnect the power cord(s) and power on the system.

VGA Enable/Disable

JPG1 allows you to enable or disable the VGA port. The

default position is on pins 1 and 2 to enable VGA. See the

table