14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909. 597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are sub ject to c hange without not ice. For latest product in formation,
please visit Acnode s’ we b si te a t ww w.acnodes. com.
RMC 7150
14” short depth rack server
5
1.2 Serverboard Features
It is a dual processor serverboard based upon Intel’s 5500 +ICH10R chipset. Below are the main features of the processor.
Processor
It supports a single or dual two Intel 5500 Series processors in LGA1366 sockets.
Memory
Slots can support up to 24 GB of ECC.
Serial ATA
An on chip SATA controller is integrated to provide a six-port, 3Gb/sec SATA subsystem, which is RAID 0, 1, 5 and 10
supported. The SATA drives are hot-swappable units.
Backpanel Ports
Onboard I/O backpanel ports include one COM port, a VGA port, two USB ports, PS/2 mouse and keyboard ports and two
GIgabit LAN (NIC) ports. A UID button is also included on the backpanel.
Other Features
Other onboard features that promote system health include voltage monitors, a chassis intrusion header, auto-switching
voltage regulators, chassis and CPU overhear sensors, virus protection and BIOS rescue.
1.3 Server Chassis Features
The RMC 7150 is built on a 1U rackmount server chassis. The following is a general outlind of the main features of the
RMC 7150 chassis.
System Power
When configured as the RMC 7150, the chassis features a single power supply.
Serial ATA Subsystem
The RMC 7150 chassis is designed to support one internal SATA hard drive. The internal drive is not hot swappable.
Control Panel
The RMC 7150’s control panel provides important system monitoring and control information. LEDs indicate power on,
network activity, hard disk drive activity, overheat warning and fan failure. The control panel also includes a main power
button and a reset button.
Rear I/O Panel
The rear I/O panel on the chassis provides one PCI expansion card slot, one COM port (another ins internal), two USB
ports, PS/2 mouse and keyboard ports, a VGA (graphics) ports and two Gb Ethernet ports.
Cooling System
The RMC 7150 chassis has an innovative cooling design that features an air shroud and three 4-cm counter-rotating fans
with user-defined fan speed control. (Fan speed may defined with a BIOS setting.)