Acnodes RMC 7150

14628 Central Blvd,

Chino, CA91710

tel:909.597.7588, fax:909. 597.1939

are sub ject to c hange without not ice. For latest product in formation,

please visit Acnode s’ we b si te a t ww w.acnodes. com.

RMC 7150

14” short depth rack server

Manual Organization

Chapter 1: Introduction

The first chapter provides a checklist of the main components included with the server system and describes the main

features of the RMC 7150 and its chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the RMC 7150 into a rack and check out the server configuration prior

to powering up the system. If your server was ordered without the processor and memory components, this chapter will refer

you to the apporopriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions and information provided by the control

panel on the chassis as well as other LEDs located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed

when installing and servicing the RMC 7150.

Chapter 5: Advanced Setup

Chapter 5 provides detailed information on the RMC 7150, including the locations and functions of connectors, headers and

jumoers. Refer to this chapter when adding or removing processors or main memory and when reconfiguring the server.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the RMC 7150 chassis. YOu should follow the procedures given in this chapter

when installing, removing or reconfiguring Serial ATA or peripheral drives and when replacing system power supply units and

cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introdcution to BIOS and provides detailed information on running the CMOS Setup Utility.