Acoustic Research ART1 Basic Operation, Power/Standby Mode, Mode Source Selection, No Alarms Set

BASIC OPERATION

Power/Standby Mode

When the unit is plugged in it automatically assumes standyby mode, with the clock displayed (see images below).

NO ALARMS SET ALARM 1 AND 2 SET

Press the button on the top of the radio to turn the radion on.

Mode (Source) Selection

1.Press the MENU button to access the mode selection screen.

2.Turn the Rotary Encoder left/right to highlight FM, AM, iPod, AUX or Nature (to select one of four included nature sounds).

3.Press OK to select the highlighted menu choice.

FM Radio Operation

See “Radio Operation” on page 14.

AM Radio Operation

See “Radio Operation” on page 14.

iPod Operation

See “iPod Operation” on page 17.

Auxiliary Input

Select AUX to access an audio source connected to the AUX IN connector on the back of the radio.

NOTE: If a device is connected to the AUX IN connector while listening to another source, the unit will display the message “Switch to AUX?”. Turn the rotary encoder to highlight YES or NO and then press the OK button to confirm.

Nature Sounds Mode

The unit contains four relaxing Nature sounds that can be accessed at any time or selected as your wake-up source for an alarm. To listen to a Nature sound, select Nature from the MENU and then use the rotary encoder to highlight one of the following sounds: OCEAN, BROOK, NIGHT, or RAIN. Press the OK button to confirm.

7