iPod OPERATION
Accessing iPod Mode
1.Press the MENU button to access the mode selection screen.
2.Turn the Rotary Encoder left/right to highlight iPod.
3.Press OK to access iPod mode.
NOTE: If a device is connected to the iPod connector while listening to another source, the unit will display the message “Switch to iPod?”. Turn the rotary encoder to highlight YES or NO and then press the OK button to confirm.
If an iPod is not detected, the following screen appears:
iPod Menu Navigation
•Press the MEM button to move up a menu level.
•Press the OK button to move to the next (lower) menu level.
•Turn the rotary encoder to highlight menu list items.
•Press the TUNE - or TUNE + buttons to skip tracks.
•Press and hold the TUNE +/TUNE - buttons to fast forward/reverse when a song is playing.
17
