
RADIO MODE
SELECT RADIO AS PLAYING SOURCE
■Open the SOURCE MENU and then touch the RADlO icon.
SELECT ONE RADIO BAND
■Press the [BAND] key on the display panel or on the remote control or touch the [BAND] icon on the user interface to select one radio band among FM1, FM2, FM3, AM1 and AM2.
AUTO TUNING
■Press the []/[] key on the display panel or on the remote control or touch the []/[] icon on the user interface to seek a higher/lower station. To stop searching, repeat the operation above or press other keys having radio functions.
NOTE:
■When a station is received, searching stops and the station is played. If the unit receives a stereo broadcasting, the indicator light of stereo 'ST' on the TFT or on the LCD display will be lighted.
MANUAL TUNING
■During manual tuning, the frequency will be changed in steps. Press the []/[] key on remote control or touch the []/[] icon on the user interface to tune in a higher/lower station.
■Touch the numeric keypad icon [S] and then touch the numeric buttons to input the radio station frequency numbers.
AUTO SAVE
■Only stations with sufficient signal strength will be detected and stored in the memory. When the monitor is closed, press and hold the [AS/PS] key on the display panel.
■When the monitor is opened, touch the [AS] icon on the user interface.
■To stop auto save, press other keys having radio functions.
NOTES:
■After auto save, the previous saved stations will be overwritten.
■The unit has 5 bands, such as FM1, FM2, FM3, AM1, AM2, and each band can store 6 stations; hence the unit can store 30 stations in total.
12