ACR Electronics ZE-NES14 Source, Level, Method of Changing Passwort, Please Note, Ts Cal

ZE-NC514

SETUP

■Source

Select one playing source that you want to set relative volume.

■Level

You can set relative volume level from 0 to 6.

METHOD OF CHANGING PASSWORT

1.Locate the cursor on the “Anti-PSW” option, press the numeric keys on the remote control or touch the “Anti-PSW” option directly to open the onscreen keypad. Touch the numeric buttons to enter the factory default code “012345” to deactivate the anti theft function.

2.Repeat the operation above to enter a new 6 digit password and confirm by pressing the enter button. Your new personal password becomes effective and the unit will be locked when disconnected from power.

￿PLEASE NOTE:

■Do use a code you can easily remember. Unlock the unit is not free of charge and can only be done by an authorized ZENEC service center.

TS CAL

■When the touch function is not sensitive or valid, you should calibrate the touch screen by this function.

■Calibrate the touch screen just following the screen introductions after entering the TS CAL mode.

35