ZE-NC514
DEVICE CONNECTIONS
NOTES OF CONNECTION
■This unit is designed to be used in a vehicle with a
■To avoid short circuit in the electrical system, ensure that the negative battery cable is disconnected before installation.
■To prevent short circuit in the wiring and damaging to this unit, secure all wirings with cable ties or adhesive tape. Route the wirings in a secured, out of heating place without touching any moving parts such as gear shift, handbrake, and seat rails to prevent the wiring insulation being melted/wore off.
■Never pass the yellow power cord through the installation hole into the engine compartment and connect to the car battery. Otherwise, a high possibility of serious short circuit to the electrical system may occur.
■Replacing a new fuse with 10 A rating when the old one is broken, using no fuse or fuse with improper rating may cause damage to this unit or even fires. lf a proper fuse is installed and electrical problems still occur, please contact with any professional car shops for inquiry.
■Please make sure all the wiring connections and the cables of the speakers are well- insulated. Otherwise, this unit may be damaged by short circuit.
■lf there is no ACC available, please connect ACC lead to the power supply with a swit ch.
■lf an external power amplifier is connected, please don't connect P.CONT lead to the power lead of the external power amplifier, otherwise, electric spark or other damage may be resulted.
■Never ground the speaker output to prevent the damage to the
■The minimum rating of the speakers connected to this unit is 50 W with 4 to 8 Ω impedance.
39
