ZE-NC514
11
BASIC OPERATIONS
DISPLAY SYSTEM TIME
■ Press and hold the [DISP] key on the front panel to switch the display information
between system time and playing source when the TFT monitor is closed.
USING THE TFT MONITOR
Open/Close monitor
■ Press the [OPEN/CLOSE] key on the front panel or remote control to push the display
panel out or in.
Change the monitor tilt angle
■ Due to the inherent character of LCD panels, you will get different vision impressions
when you watch it from different angles. The display angle of this unit can be changed;
hence you can select the best angle where you can get the best vision impression.
■ Press the [TILT] key on the display panel or the remote control to adjust the tilt angle one
step at a time.
■ Press and hold the [TILT] key on the display panel or the remote control to adjust the tilt
angle continuously.
Change aspect ratio
■ Press the [WlDE] key on the display panel or remote control to adjust the aspect ratio.
lmage setting
1. Enter image setting mode
■ Press the [PIC] key on the remote control.
2. Select one item to adjust
■ Press the []/[] keys on the remote control.
3. Adjust the value
■ Press the []/[] keys on the remote control.
4. Exit image setting mode
■ To exit image setting mode, repeat the first step or stop operation for some seconds.
RESET THE UNIT
■ lf the unit can not work correctly, you should reset the unit by pressing the [RESET]
button on the front panel.