Actiontec electronic 56K Installing the Modem

Installing the Modem

The drawing below shows the back panel of the 56K External Call Waiting Modem

and the correct cable installation. The computer interface cable has both 9-pin and

25-pin serial port connectors for use on most computers See your computer owners

manual for the location and function of your serial (COM) ports.

Note: Connect only one connector (either 9 pin or 25 pin as appropriate) to your

computers serial (COM) port. Do not connect both.

Figure 1: Connecting the Cables

Contents

Main Table of Contents Introduction Action Contacting tec Customer Support Safety Information Product Registration Product Features Getting Started Before You Begin Using the Telephone Answering Machine Functions with Windows 95 Installing the Modem Installing the Interface Cables Modem Controls and Indicators Page Page Page Configuring Windows 95B Page Page Page Page Page Page Page Page Configuring Windows 3.1X, OS/2 WARP, DOS, UnixWare, and Linux Installing Communications Software The Modems Voice Features Page The Call Waiting Feature To Receive an Incoming Call while Online: To Ignore an Incoming Call Using The Call Waiting Control Utility AT Command Set Command Format Basic AT Commands AT Commands Affecting ITU-T V.90 Operation Examples Help and Service Information Reconfiguring a Windows Dial-Up Networking Connection Notices Declaration of Conformity Telecommunications Regulations FCC PART 68 REQUIREMENTS Canadian Department Of Communications (CDOC) Certification Label