Actiontec 54 Mbps Wireless DSL Gateway User Manual

3.The Network window appears. Select Built-In Ethernet from the “Show” drop-down list.

4.Select TCP/IP and, from the “Configure” drop-down list, select Using DHCP.

5.Click Apply Now and close the “System Preferences” application. The TCP/ IP settings are configured.

To finish setting up the computer to connect with the Gateway, follow the instruc- tions in chapter 3, “Performing a Basic Setup,” on page 33.

124

Page 127
Image 127
Actiontec electronic GT701WG user manual 124