Chapter 4 Using Advanced Setup

WAN IP Address

Selecting WAN IP Address in the “Advanced Configuration” screen generates the “WAN IP Address” screen. WAN IP Address allows manual set up of the IP address of the Gateway. There are five ways to do this: Transparent Bridging, Obtain an IP Address through PPPoE, Obtain an IP Address Through PPPoA, Obtain an IP Address through DHCP, and Specify a Static IP Address.

Note: Some DSL providers use PPPoE/PPPoA to establish com- munication with an end user. Other types of broadband Internet connections (such as fixed point wireless) may use either DHCP or Static IP address. If unsure about which connection

is present, check with the Internet Service Provider (ISP) before continuing.

After selecting a connection type, click Next to continue configuring the connection.

39

Page 42
Image 42
Actiontec electronic GT701WG user manual WAN IP Address