33
Performing a Basic Setup
This chapter is a guide through a basic setup of the Gateway for those users who
did NOT use the Actiontec Installation Buddy® to setup the Gateway. The Basic
Setup includes instructions on how to connect the Gateway to the ISP and chang-
ing the admin user name and password.
To complete a basic setup, the user will need information provided by the ISP. This
information is sometimes contained in a welcome letter or ISP worksheet. If this
document is not available, contact the ISP immediately and request one.

Basic Setup

To configure the Gateway for basic operation:
☞ Note: If you already set up the Gateway using the Installation
Buddy (as described in Chapter 2, “Setting Up the Gateway”), the
settings described in this section have already been configured.
Please continue to chapter 4, “Using Advanced Setup,” to configure
the advanced settings of the Gateway.
1. Open a Web browser. In the address bar, enter
http://192.168.0.1
then press Enter on the keyboard.
2. The “Main Menu” screen appears. Select Setup/Configuration.
3