USE
Weather Category Alarm Functions
WEATHER ALARMS:
Each weather category (example- “OUTDOOR TEMP” category shown below) features alarm options. The alarm options are displayed to the left of the currently selected weather category.
Alarms are all set to “OFF” by default upon powering on the display console.
NOTE: Some weather categories will only have either low alarm OR high alarm options. For example, WIND SPEED only has a HIGH wind speed alarm. In these cases, only the relevant alarms for the selected weather category may be set.
ALARM VALUE ADJUST MODE:
To adjust an alarm value for the currently selected weather category, press AND HOLD the “ALARM” button for the alarm you wish to set. Note the adjust (ADJ) indicator
press and HOLD “ALARM” to enter into adjust mode
To adjust the alarm value, press the down or up buttons. When you are finished making adjustments to the alarm value, press the “ALARM” button again to confirm your adjustments.
press to adjust the alarm value down or up
20
USE
TURNING ALARMS ON or OFF:
After you have adjusted and set an alarm value, you will note that the alarm is NOT automatically turned on. This is done to help prevent “false alarms” and also allows you to set all your preferred alarm values ahead of time without having to turn them all off when you are finished.
To turn an alarm ON, press the alarm button. You will note the “OFF” will change to “ON” momentarily, and then the alarm value will be displayed. This alarm is now “ON”, and the display console will alert you when this value is reached with an audible alarm and an alarm icon indicator on the display.
ADJ
press “ALARM” to turn alarm on or off
SILENCE A SOUNDING ALARM:
When an alarm is sounding, the weather category display will automatically change to show the affected category and alarm (flashing). The affected weather data on the display console will also flash.
The alarm will sound initially for a few minutes, then silence itself. The alarm will then sound every few minutes afterwards until one of the following takes place.
1.“SNOOZE”- To silence a sounding alarm, press any button. This will act similar to the “SNOOZE” function on an alarm clock. The alarm will silence, but will sound again if the alarm condition still exists later.
2.Turn the alarm “OFF”- The only way to permanently silence any potential alarms is to turn the alarm “OFF”.
21