17Configuring the Adaptec SCSI Card 39160 with SCSISelect
SCSI Device Configuration:
Sync Transfer Rate (MBytes/sec) 160, 80.0, 53.4, 40.0,
32.0, 26.8, 20.0,
16.0, 13.4, 10.0,
ASYN
160
Initiate Wide Negotiation Yes, No Yes (Enabled)
Enable Disconnection Yes, No Yes (Enabled)
Send Start Unit Command Yes, No Yes (Enabled)
Enable Write Back Cache 2Yes, No,
N/C (No Change) N/C (No
Change)
BIOS Multiple LUN Support 2 Yes, No No (Disabled)
Include in BIOS Scan 2 Yes, No Yes (Enabled)
Advanced Configuration Options:
Reset SCSI Bus at IC Initialization Enabled, Disabled Enabled
Display <Ctrl> <A> Messages during
BIOS Initialization [Auto-sync] Enabled, Disabl ed Enabled
Extended BIOS Translation for
DOS Drives > 1 GByte Enabled, Disabled Enabled
Verbose/Silent Mode [Auto-sync] Verbose, Silent Verbose
Host Adapter BIOS [Auto-sync] Enabled
Disabled: Scan Bus
Disabled: Not Scan
Enabled
Domain Validation 2 [Auto-sync] Enabled, Disabled Enabled
Support Removable Disks Under BIOS
as Fixed Disks 2 Disabled,
Boot Only,
All Disks
Disabled
BIOS Support for Bootable CD-ROM 2 Enabled, Disabled Enabled
BIOS Support for Int 13 Extensions 2 Enabled, Disabled Enabled
1
Setting is valid only if Multiple LUN Support is enabled.
2 Settings are valid only if host adapter BIOS is enabled.
SCSI
Select
Options Available Settings Default Setting