Adaptec 39106 Select

Configuring the Adaptec SCSI Card 39160 with SCSISelect

Select

To select an option, use the arrow keys to move the cursor to the

option, then press Enter. In some cases, selecting an option displays

another menu. You can return to the previous menu at any time by

pressing Esc.

To restore the original SCSISelect default values, press F6 from the

main SCSISelect screen.

■Host Adapter SCSI ID—(Default: 7) Sets the SCSI ID for the

SCSI card. The Adaptec SCSI Card 39160 is set at 7, which

gives it the highest priority on the SCSI bus. We recommend

that you do not change this setting.

■SCSI Parity Checking—(Default: Enabled) When set to

Enabled, verifies the accuracy of data transfer on the SCSI bus.

Leave this setting enabled unless any SCSI device connected to

the Adaptec SCSI Card 39160 does not support SCSI parity.

■Host Adapter SCSI Termination—(Default: Automatic) Deter-

mines the termination setting for the SCSI card. The default

setting is Automatic, which allows the SCSI card to adjust the

termination as needed. We recommend that you do not change

this setting.

■Boot Channel—(Default: A First) Specifies which of the two

SCSI channels the boot device is connected to (if the computer

boots from a SCSI device). If you change this setting, the

change automatically applies to both SCSI channels.

■Boot SCSI ID—(Default: 0) Specifies the SCSI ID of your boot

device. We recommend that you do not change the default

setting. If you change this setting, the change automatically

applies to both SCSI channels.

■Boot LUN Number—(Default: 0) Specifies which LUN (Logi-

cal Unit Number) to boot from on your boot device. This set-

ting is not valid unless Multiple LUN Support is enabled (see

Advanced Configuration Options on page 21). If you change this

setting, the change automatically applies to both SCSI

channels.