Configuring the Adaptec SCSI Card 39160 with SCSISelect

Caution: You may lose data if you remove a removable- media cartridge from a SCSI drive controlled by the SCSI card BIOS while the drive is on. If you want to be able to remove the media while the drive is on, install the removable-media software driver and set Support Removable Disks Under BIOS as Fixed Disks to Disabled.

Boot Only—Only the removable-media drive designated as the boot device is treated as a hard disk drive.

All Disks—All removable-media drives supported by the BIOS are treated as hard disk drives.

BIOS Support for Bootable CD-ROM—(Default:Enabled) When set to Enabled, the SCSI card BIOS allows the computer to boot from a CD-ROM drive.

BIOS Support for Int 13 Extensions—(Default:Enabled) When set to Enabled, the SCSI card BIOS supports Int 13h extensions as required by Plug-and-Play. The setting can be either enabled or disabled if your system is not Plug-and-Play.

23

Page 29
Image 29
Adaptec 39106 manual Configuring the Adaptec Scsi Card 39160 with SCSISelect