Adaptec Ultra Wireless USB Adapter User’s Guide

To link your Wireless USB Adapter to your WLAN:

1Open the Adaptec Wireless Utility by double-clicking the Adaptec Wireless Utility icon on your taskbar.

Double-click

2Click the Configuration tab.

a Ensure that the Operating Mode setting is correct for your WLAN. Each station on your WLAN must be set to the same operating mode. (See Changing the Operating Mode on page 32 for more information.)

b Check that the Wireless Network ID (SSID) is the same as the one used on your other WLAN stations.

You can also set your Wireless Network ID to the word any, which allows your Wireless USB Adapter to connect to any Wireless device on your WLAN.

Note: Ensure that Access Points on your WLAN allow connections from Wireless devices set to any before using this setting.

cIf you are using Ad-hoc mode, check that the Channel number is the same number used on your other WLAN station. If you are using Infrastructure mode, the Channel number is set by your Access Point (AP). (See channel on page 45 for more information.)

dMake any necessary changes, then click Apply Changes.

28