Connecting to the WLAN

3Click the Encryption tab.

aEnsure that the Encryption Key Length setting is correct for your WLAN. Each station on your WLAN must have the same Encryption Key Length setting.

If your other WLAN stations are set to Disabled, you must set your Wireless USB Adapter to Disabled.

If your other WLAN stations have Encryption enabled, you must enable Encryption on your Wireless USB Adapter using exactly the same Encryption Key Length and WEP Key Entry Passphrase or Manual Entry information. (See Changing the Encryption Settings on page 34 for more information.)

bMake any necessary changes, then click Apply Changes.

4Click the Advanced tab.

a If Encryption is enabled, ensure that the Security Authentication Type is set to Auto.

b Ensure that the Preamble Type is correct for your WLAN. Each station on your WLAN must have the same Preamble Type setting.

c Make any necessary changes, then click Apply Changes.

5Click OK to close the Adaptec Wireless Utility.

You have completed the Installation Task List.

See Checking Your Network Connection on page 30 for more information on using your Wireless USB Adapter.

For more information on customizing your WLAN, see Changing the Set-up of Your WLAN on page 31.

29