Troubleshooting

3Select an Access Point, then click Connect.

If a link is made, the Adaptec Wireless Utility icon turns green (see page 30) and the Link LED on your Wireless USB Adapter lights up.

If no link is made, click the Link tab. If the Link Quality or Signal Strength values are lower than 25 percent, it’s unlikely that you’ll be able to connect to that AP.

Click Re-Scanto search for other available APs and repeat Step 3 if possible.

You may need to reposition your computer so that your Wireless USB Adapter is closer to an AP.

4Click OK to close the Adaptec Wireless Utility.

41