Manuals / ADC / Laundry Appliance / Clothes Dryer

ADC AD-310 service manual Control Power On

Models: AD-310

1 119
Download 119 pages 59.94 Kb
Page 10
Image 10

EMERGENCY (E-Stop) STOP BUTTON (Push To Stop/Turn To Release or Pull To Release)

This "red" mushroom push-button, located in the center of the Right Front Control Door almost directly under the Phase 5 Microprocessor Controller (computer) is a “Push To Stop” and “Turn To Release” type push- button. This button must be in the released mode to power the machine (enable the machine to run).

JOG (Forward/Reverse Push-Buttons)

These two (2) push-buttons, located towards the left side of the Right Front Control Door, are for either loading or unloading the tumbler. “JOG” functions are only enabled when the tumbler section is in a tilted position.

NOTE: There is a PLC (Programmable Logic Controller) controlled “DWELL TIME” between forward jog or reverse jog selection to prevent plug starting the tumbler drive motor.

LOAD / DRY / UNLOAD (Three [3] Position Selector Switch)

TILT (Off - On) (Two [2] Position Selector Switch)

The “LOAD / DRY / UNLOAD” and “TILT (Off - On)” selector switches work in conjunction with each other. If the “TILT” selector is in the “OFF” position, an “UNLOAD" or “LOAD” selection will open the front horizontal doors, allowing an operator to load or unload the tumbler in the level position.

NOTE: The “JOG” feature will respond in the level position. The Lint Drawer must be closed for the “JOG” feature to operate.

If the “TILT” selector is in the “ON” position, an “UNLOAD” selection will open the front vertical doors and tilt the tumbler section towards the front (Rear Up). Likewise, a “LOAD” selection will the front horizontal doors and tilt the tumbler section towards the rear (Front Up).

The “DRY” selection will bring the tumbler section to a level position and close the front horizontal doors. Once ALL safe conditions are met (i.e., front doors closed, lint drawer closed, machine level), an operator will be able to select a drying cycle on the Phase 5 Microprocessor Controller’s (computer) keypad (touchpad), located on the Right Front Control Door. Refer to the Phase 5 Operator’s manual for details.

HEATER FAULT (Indicator/Reset Button) for GAS MODELS ONLY

During a drying cycle the PLC (Programmable Logic Controller) monitors the status of the Phase 5 Micro- processor Controller’s (computer) “Heat On/Off” signal, the control status of the front and rear gas valves, and the state of both the front and rear burner air flow switches. If a fault is sensed, the "HEATER FAULT" indicator and “END OF CYCLE" indicator will begin to flash at a rate of one (1) per second. Both indicators will flash until the operator presses the “HEATER FAULT" reset push-button. For more details on “HEATER FAULT” refer to the operation section in this manual.

CONTROL POWER (On)

This "GREEN LIGHTED OPERATOR," located on the Right Front Control Door, is for enabling the dryer’s control voltage. This push-button must be “ON” for drying or load/unload function to occur.

6

Page 9 Page 11
Page 10
Image 10
ADC AD-310 service manual Control Power On
Page 9 Page 11

AD-310 specifications

The ADC AD-310 is a versatile and compact audio digital converter designed to meet the demands of audio professionals and enthusiasts alike. With its advanced technology and user-friendly features, the AD-310 stands out in the crowded marketplace of audio interface solutions.

One of the main features of the ADC AD-310 is its high-resolution audio conversion capabilities. Supporting sample rates up to 192 kHz and resolutions of up to 24 bits, the AD-310 ensures that audio captures are of the highest fidelity, making it ideal for recording, mixing, and mastering tasks. This level of detail is crucial for audio professionals who require precision and clarity in their audio signals.

Another standout characteristic of the ADC AD-310 is its robust connectivity options. It comes equipped with both USB and optical ports, enabling seamless integration with a variety of digital audio workstations (DAWs) and other audio equipment. This flexibility allows users to choose their preferred connection method, enhancing the overall workflow and efficiency during production.

The AD-310 also features advanced analog-to-digital and digital-to-analog converters, which contribute to its impressive dynamic range and low total harmonic distortion (THD). This ensures that the audio output is clean and true to the original signal, making it suitable for both recording and playback applications. Additionally, the unit incorporates real-time monitoring capabilities, allowing users to hear adjustments as they make them, ensuring the perfect mix every time.

For ease of use, the ADC AD-310 is designed with a simple, intuitive interface. Its layout includes clearly labeled controls and LED indicators, allowing users to quickly assess levels and settings at a glance. This design philosophy extends to its compact form factor, making it easy to transport and integrate into any studio setup, whether it be in a professional environment or home studio.

With its combination of high-quality audio processing, flexible connectivity, and user-friendly design, the ADC AD-310 is an excellent choice for anyone looking to elevate their audio production experience. Whether used by professionals or hobbyists, the AD-310 delivers performance and reliability that sets it apart in the audio converter market.