3.Sprinkler System Component Replacement
a. Resistive Temperature Device (RTD) Replacement
1)Turn the water supply to the dryer off.
2)Discontinue electrical service to the dryer.
3)Remove the 1/4" compression fitting.
4)Remove the two (2) screws from the junction box cover.
5)Remove the wires of the RTD (Resistive Temperature Device) from the terminal strip.
NOTE: Identify the wires removed for proper reinstallation.
6)Loosen the cord grip cap.
7)Remove Resistive Temperature Device (RTD).
8)To install new RTD (Resistive Temperature Device), reverse above procedure..
prior to November 14, 1996
as of November 14, 1996
5 4
