J. DOOR SYSTEMS
The dryer utilizes two (2) styles of doors, which are Manual Doors and Pneumatic Automatic Doors.
1.Manual Door Description
The Manual Doors run on a single aluminum track with a wheel assembly mounted above the doors and a channel with teflon strips mounted on the bottom of the doors ...
a.For dryers manufactured as of November 1, 1995, there are trolley bolts located at the top of the doors to secure the doors onto the track.
b.For dryers manufactured prior to November 1, 1995, there are two (2) adjustment plates located at the top of the doors to secure the doors onto the track.
In the center portion on the top of the doors there is a magnet used in conjunction with proximity sensors which are mounted above the doors.
2.Pneumatic Automatic Description/Operation a. Description
The Pneumatic Automatic Doors run on a single aluminum track mounted above the doors and a split track mounted on the bottom of the doors. The doors are held on the track by four (4) stainless steel wheel assemblies; two (2) are located on the top of the doors and two (2) are located on the bottom of the doors. Additionally, in the center portion on the top of the doors there is a magnet used in conjunction with proximity sensors which are mounted above the doors.
b. Operation
There are two (2) 1" bore x
(4)ports is a flow control valve used for adjusting the opening and closing speeds of the doors. These flow controls only vary the speed in the exhaust direction. Air to the cable cylinders is supplied through a
If the "EMERGENCY STOP"
1)In a
7 5