AC Power Requirements, Dimensions, Weight | ADC ADDC1 manual

AC Power Requirements


Input Operating Voltage Range (VAC RMS)	110		V setting – 95 V min, 140 V max
	220		V setting – 190 V min, 285 V
	max
Frequency	50-60 Hz
Power	16	Watts Idle
	16	Watts Typical Program
	20	Watts Maximum
Fuses	5 x 20 mm (2 required)
	110		V setting – 0.5 A 250 V Slo-Blo®
	Type
	220		V setting – 0.5 A 250 V Slo-Blo®
	Type

Dimensions

Form Factor	½ Rack Wide, 1 RU High
Depth behind front panel	8.5” (216 mm)
Overall depth including connectors but without power	9.33” (237 mm)
cord or BNC-to-RCA adapter
Width	9.5” (249 mm)
Height	1.725” (44.5 mm)

Weight

ADC1 only	3.6 lb.
ADC1 with power cord, 3 BNC-to-RCA adapters, extra	4.9 lb.
fuses, and manual
Rack mount kit (blank panel, junction block, and rack-	0.32 lb.
mount screws)
Shipping weight	7 lb.

ADC1 Instruction Manual

Page 30

Image 30

ADC ADDC1 instruction manual AC Power Requirements, Dimensions, Weight

Contents

Benchmark ADC1 Channel 24-bit 192-kHz Audio Analog-to-Digital Converter Safety Information Federal Communications Commission FCC Notice Only Contents Overview Page Features Clock Reference Input ConnectionsBalanced Analog Line Inputs To adapt to unbalanced sources Digital Outputs AES/EBU XLR OutputOptical Output Adat S/MUX4 Optical Output Mode Adat Optical Output ModeAdat S/MUX2 Optical Output Mode SPDIF/AES BNC Main and Aux Outputs AC Power Entry Connector Word Clock Reference OutputFuse Holder Operation Mode Switch and DisplayTo program the conversion mode Programming the Outputs To synchronize with an external clock source Selecting a Fixed Frequency Using the Internal Clock SourceReading Sample Rates off of the Mode Display To select a fixed sample frequency on the Main Outputs Adat or AES/EBU on the Optical Output Resetting the ADC1 to Factory Default SettingsProgramming the Aux Output Meter Display Adjusting Input Gain First Stage GainSecond Stage Gain Controls Rack Mounting Sample Rate is the Key that Controls S/MUX Using Adat S/MUXProper S/MUX Identification is a Must MUX should not be used for Sample Rate Conversion UltraLock … What is It? Problem #1 Put UltraLock converters to the test What UltraLock converters cannot do Performance Frequency Response Inter-Channel Phase Response KHz LPF unweighted THD+N vs. Level, 1 KHz 32K B-H FFT, Idle Channel Noise 32K B-H FFT, -3 dBFS, 1 KHz 32K B-H FFT, -3 dBFS, 10 KHz Specifications Analog Audio InputsWorldclock Reference Output Digital Audio Outputs Audio Performance Group Delay Latency LED Status Indicators AC Power Requirements DimensionsWeight Page Warranty Information Benchmark 1 Year Warranty Benchmark Extended 5* Year Warranty Benchmark Extended Warranty Benchmark Media Systems, Inc