Rack Mounting | ADC ADDC1 manual

Down Position

Rack Mounting

To enable rack mounting, the front panel of the ADC1 has rack-mount holes that are machined to conform to standard rack mount dimensions. The width of the ADC1 panel is exactly ½ that of a standard 19” panel. The ADC1 is one rack unit high. Either ear of the ADC1 can be mounted directly to a standard 19” rack. A machined junction block connects the other ear to a ½ width blank panel, another ADC1, a DAC1, or other ½ width Benchmark products. When joined, the two units form a single rigid 19” panel that can be installed in any standard 19” rack.

ADC1 Instruction Manual

Page 15

Image 15

ADC ADDC1 instruction manual Rack Mounting

Contents

Channel 24-bit 192-kHz Audio Analog-to-Digital Converter Benchmark ADC1 Federal Communications Commission FCC Notice Only Safety Information Contents Overview Page Features To adapt to unbalanced sources ConnectionsBalanced Analog Line Inputs Clock Reference Input Digital Outputs AES/EBU XLR OutputOptical Output SPDIF/AES BNC Main and Aux Outputs Adat Optical Output ModeAdat S/MUX2 Optical Output Mode Adat S/MUX4 Optical Output Mode AC Power Entry Connector Word Clock Reference OutputFuse Holder Programming the Outputs Mode Switch and DisplayTo program the conversion mode Operation To select a fixed sample frequency on the Main Outputs Selecting a Fixed Frequency Using the Internal Clock SourceReading Sample Rates off of the Mode Display To synchronize with an external clock source Meter Display Resetting the ADC1 to Factory Default SettingsProgramming the Aux Output Adat or AES/EBU on the Optical Output Adjusting Input Gain First Stage GainSecond Stage Gain Controls Rack Mounting MUX should not be used for Sample Rate Conversion Using Adat S/MUXProper S/MUX Identification is a Must Sample Rate is the Key that Controls S/MUX UltraLock … What is It? Put UltraLock converters to the test Problem #1 What UltraLock converters cannot do Frequency Response Performance Inter-Channel Phase Response THD+N vs. Level, 1 KHz KHz LPF unweighted 32K B-H FFT, Idle Channel Noise 32K B-H FFT, -3 dBFS, 1 KHz 32K B-H FFT, -3 dBFS, 10 KHz Specifications Analog Audio InputsWorldclock Reference Output Digital Audio Outputs Audio Performance LED Status Indicators Group Delay Latency AC Power Requirements DimensionsWeight Page Benchmark 1 Year Warranty Warranty Information Benchmark Extended Warranty Benchmark Extended 5* Year Warranty Benchmark Media Systems, Inc