ADC ADDC1 instruction

ADC1 Instruction Manual

Page 31

Image 31

ADC ADDC1 instruction manual

Contents

Channel 24-bit 192-kHz Audio Analog-to-Digital Converter Benchmark ADC1 Federal Communications Commission FCC Notice Only Safety Information Contents Overview Page Features To adapt to unbalanced sources ConnectionsBalanced Analog Line Inputs Clock Reference Input AES/EBU XLR Output Digital OutputsOptical Output SPDIF/AES BNC Main and Aux Outputs Adat Optical Output ModeAdat S/MUX2 Optical Output Mode Adat S/MUX4 Optical Output Mode Word Clock Reference Output AC Power Entry ConnectorFuse Holder Programming the Outputs Mode Switch and DisplayTo program the conversion mode Operation To select a fixed sample frequency on the Main Outputs Selecting a Fixed Frequency Using the Internal Clock SourceReading Sample Rates off of the Mode Display To synchronize with an external clock source Meter Display Resetting the ADC1 to Factory Default SettingsProgramming the Aux Output Adat or AES/EBU on the Optical Output First Stage Gain Adjusting Input GainSecond Stage Gain Controls Rack Mounting MUX should not be used for Sample Rate Conversion Using Adat S/MUXProper S/MUX Identification is a Must Sample Rate is the Key that Controls S/MUX UltraLock … What is It? Put UltraLock converters to the test Problem #1 What UltraLock converters cannot do Frequency Response Performance Inter-Channel Phase Response THD+N vs. Level, 1 KHz KHz LPF unweighted 32K B-H FFT, Idle Channel Noise 32K B-H FFT, -3 dBFS, 1 KHz 32K B-H FFT, -3 dBFS, 10 KHz Analog Audio Inputs SpecificationsWorldclock Reference Output Digital Audio Outputs Audio Performance LED Status Indicators Group Delay Latency Dimensions AC Power RequirementsWeight Page Benchmark 1 Year Warranty Warranty Information Benchmark Extended Warranty Benchmark Extended 5* Year Warranty Benchmark Media Systems, Inc