Checking LED Indications
CHECKING LED INDICATIONSYour service provider sets up the ADSL parameters for your service. The MM701F must have the DSL SYNC LED lit before you can connect sessions with your service provider.
The table below describes LED indications for all operational modes. LEDs on the MM701F front panel provide continual status
LED | State | Description |
|
|
|
POWER | On green | MM701F has power. |
| Off | MM701F does not have power. |
|
|
|
|
| Ethernet |
LINK | On green | A PC, hub, or other network device is connected to the MM701F |
|
| |
| Off | No device is connected to the MM701F |
TX | Flashing green | MM701F is transmitting data to devices on the LAN. |
| Off | MM701F is not transmitting data to the LAN. |
RX | Flashing green | MM701F is receiving data from devices on the LAN. |
| Off | MM701F is not receiving data from the LAN. |
COL | Flashing green | Ethernet packet collisions are occurring on the LAN. |
| Off | No Ethernet packet collisions are occurring. |
|
|
|
|
| DSL |
SYNC | On green | DSL transceiver is synchronized (connected) and in normal operation |
|
| mode. |
| Flashing green | Slow flashing green indicates that the DSL transceiver is in a |
|
| or handshaking sequence. Fast flashing green indicates the DSL |
|
| transceiver is in training sequence. |
| Off | DSL transceiver is not detecting a transceiver at the far end and is not |
|
| connected. |
TX | Flashing green | MM701F is transmitting data over the DSL connection. |
| Off | MM701F is not transmitting data over the DSL connection. |
RX | Flashing green | MM701F is receiving data over the DSL connection. |
| Off | MM701F is not receiving data over the DSL connection. |
MAR | On green | DSL margin is above the preset margin value. |
| Off | DSL margin is at or below the preset margin value. |
|
|
|
6 | MM701F User Manual |