Setting Up a Telnet Session

SETTING UP A TELNET SESSION

Make sure your PC is on the same IP subnet as the modem as described in “Setting Up the PC” on page 10. To set up a telnet session, specify the LAN IP address of the modem to establish communication. The default LAN IP address is 10.0.0.1. If this IP address has changed, contact your network administrator.

You cannot manage the modem through the console port and a telnet session at the same time.

Below is an example using the telnet application in Microsoft Windows 98:

1Click Start, Run to access the Run dialog.

2In the Open box, enter the telnet command and IP address (for example: 10.0.0.1) then click OK to start the Windows telnet client and access the password prompt. Enter the telnet password to access the Main Menu page. The default telnet password for the MM701F is password.

44

MM701F User Manual