Chapter 3: Managing the Modem Using a Web Browser

2Configure the following parameters as supplied by your service provider:

ParameterDescription

ADSL Standard for physical layer interface

Trellis Encoding

Bin Overlap Mode

Transmit Power Attenuation Coding Gain

Maximum Bits per Bin Transmit Start Bin Transmit End Bin Receive Start Bin Receive End Bin Maximum Downstream Rate SNR Margin Limit

Select from the options:

•ITU G.992.2 G.lite

•ITU G.992.1 G.DMT (default)

•ANSI T1.413 Issue 2

•Multimode

Enable or Disable (default) Trellis Encoding. Trellis Encoding allows for high data speeds and reduces transmission errors.

Select either FDM (default) or EchoCancellation. Select a value from 0 to 12 decibels (0 is the default). Select either Auto (default) or a value from 0 to 7 decibels. Select a value from 2 to 15 (14 is the default).

Select a value from 6 to 31 (6 is the default).

Select a value from 6 to 31 (31 is the default).

Select a value from 6 to 255 (32 is the default).

Select a value from 6 to 255 (255 is the default).

Select a value from 32k to 12000k (12,000 is the default). Select a value from -64to 63 (4 is the default).

3Click Apply then save changes using “Saving Changes” on page 39.

MM701F User Manual

33