Setting Up the PC

SETTING UP THE PC

To access the modem Web interface, connect your PC to the same LAN IP subnet as the MM701F. The default LAN IP subnet for the modem is 10.0.0.0 with a subnet mask of 255.255.255.0. In addition, the modem uses 10.0.0.1 as its default LAN IP address.

However, if you have an existing subnet to accommodate the modem, change the IP address of the modem from the command-line interface as described in “Setting Up the LAN” on page 48.

If your PC cannot connect to the modem, set your PC Ethernet NIC card for 10 Mbps half-duplex transmission (not auto-detect).

The following is an example of how to set up a PC running Microsoft Windows 98.

1From the Windows desktop, click Start, Settings, Control Panel to open the Control Panel dialog.

2From the Control Panel dialog, double-click the Network icon.

3From the Configuration tab, double-click TCP/IP.

10

MM701F User Manual