Chapter 3: Managing the Modem Using a Web Browser
Update System Software
You can upgrade the software on your MM701F. To upgrade, you must specify the IP address of the server where the new software is stored. The MM701F uses TFTP to download the software which comprises a configuration file (must be named “celsiancfg”) and an image file (must be named “image”).
The software update process takes about 90 seconds to complete. After the update the modem resets itself. Do not recycle the power during this process. This will cause permanent image corruption.
1Click System on the menu bar, then System Update to access the System Update page.
2Enter the IP Address of the server where the firmware image or configuration file is located.
3From Select file to update, do one of the following:
•select Configuration to download the configuration file “celsiancfg”
•select Image to download the image file “image”
4Click Download to start the file download.
MM701F User Manual | 21 |