ADCP-80-526 • Issue 6 • December 2006

•Rear protective input terminal covers and output terminal covers—Used to prevent accidental contact with the power input and output terminals. The number of covers provided depends on the fuse configuration.

•Designation card and card holder—Used to record information about the protected equipment. The card holder has a pressure-sensitive adhesive backing to permit attachment to the panel, the rack, or a location close to the panel. The designation card inserts into the card holder. It is also available as an accessory item.

REAR COVER FOR OUTPUT POWER TERMINAL BLOCKS,

ALARM TERMINALS, AND CHASSIS GROUND TERMINALS

REAR COVERS FOR INPUT

#10 RING TERMINALS FOR

POWER TERMINAL BLOCKS

12-10 AWG WIRE (GROUNDING)

 

5/16-INCH (7.936 MM) 8-32

 

FLAT-HEAD SCREWS

 

19-INCH

 

RACK MOUNTING

 

BRACKETS

 

3/8-INCH (9.525 MM) 12-24

 

SCREWS AND #12 WASHERS

DESIGNATION CARD,

 

PROTECTIVE COVER,

 

AND CARD HOLDER

23-INCH

 

 

RACK MOUNTING

 

BRACKETS

MOUNTING BRACKETS

AND SCREWS FOR 19-INCH OR 23-INCH RACK INSTALLATION

18876-A

Figure 2. Packaged Hardware Components

Page 4

© 2006, ADC Telecommunications, Inc.