Setting the OSD Time Out, Sleep Timer

To set the front panel display brightness:

You can scroll in either direction using the and buttons.

7.Press the button when you have made a selection. Repeat steps 6 and 7 for the center and surround speakers.

NOTE: There is no delay function for the subwoofer

8.Press the button until the return to main menu option is selected.

9.Press the menu button to return to the main menu, or press the menu button twice to exit.

3.7System Configuration Setting the Display Brightness

This control sets the front panel display brightness. The default display brightness is set to be easily visible in a normally lit room. If you prefer to dim the display, for example, during movie viewing in a darkened room, you can access the VFD brightness setting from the system configuration menu.

To set the front panel display brightness:

1. Press the menu button to enter the main menu. The

main menu appears on the OSD. The cursor on the OSD should be pointing to the input configuration menu and input config appears on the front panel display.

2.Press the button until system configuration is selected. The cursor on the OSD should be pointing to the system configuration menu and system config appears on the front panel display.

3.Press the select button to enter the system configuration menu. The system configuration menu appears on the OSD. Display bright is selected.

5.Use the and buttons to choose between full and half.

6.After making your selection, exit the main menu. The dim button can also be used on the remote control.

Setting the OSD Time Out

This menu is used to set how long the on screen display will remain visible after a button is pushed or setting is changed on the GTP-880.

To set the on screen display time out:

1.Press the menu button to enter the main menu. The main menu appears on the OSD. The cursor on the OSD should be pointing to the input configuration menu.

2.Press the button until system configuration is selected. The cursor on the OSD should be pointing to the system configuration menu and system config appears on the front panel display.

3.Press the select button to enter the system configuration menu. The system configuration menu appears on the front panel display and the OSD.

4.Press the button until the OSD time out menu is selected.

5.Use the < and > buttons to cycle through the available options. The following times appear as you scroll through them: 30 sec, 25 sec, 20 sec, 15 sec, 10 sec, 5 sec, 0 sec

Note: Setting the time out to 0 sec. disables the OSD status.

6.After making your selection, press the button twice to exit the main menu.

Sleep Timer

This option allows you set how long the unit will remain on before automatically shutting off. This mode can be accessed using the sleep button on the remote control, or from system configuration menu.

To set the sleep timer from the main menu:

1.Press the menu button to enter the main menu. The main menu appears on the front panel display and the OSD. The cursor on the OSD should be pointing to the input configuration menu andinput config appears on the display.

2.Press the button until system configuration is selected. The cursor on the OSD should be pointing to the system configuration menu and system config appears on the front panel display.