Adder Technology 5000 manual Controls

Controls

When clicked, this button reveals a menu of options concerned with keyboard, video and mouse operation.

Single Mouse Mode

This mode is for fast network connections where the cursor response is sufficient to provide instant visual feedback on the remote screen. When enabled, the cursor is ‘captured’ within the viewer window until you use the ‘escape’ hot keys.

To quit from single mouse mode, press F8 and

Mouse Control

This option displays a mouse control dialog and is useful when the remote cursor is failing to respond correctly to your mouse movements, even after using the Resync mouse option.

The mouse control dialog allows you to control the remote mouse cursor using a selection of buttons that you click with your local mouse.



then P. Alternatively, enable and use the mouse button escape sequences - see Advanced unit configuration for details.

The single mouse mode does not require calibration.

Resync Mouse

This option has the same effect as the button on the menu bar and re- synchronises the local and remote mouse pointers.

Refresh Screen

This option refreshes the whole screen image to remove any artifacts from moved screen items. This is useful when using very low refresh rates on slow speed communication links.

Info

When selected, this option displays an information dialog showing the current logged on users, the current host, its video mode and its mouse motion details.

Click to produce a single mouse click for the left, centre or right mouse buttons

Click to move the remote mouse cursor up, down, left or right

Click to produce a continuous mouse click and hold for the left, centre or right mouse buttons

Click to calibrate the remote mouse

  

Click to display the Restore mouse dialog where you can reinstate a mouse that has failed to operate correctly.

continued



43