Adder Technology ALTX/ALRX, ALSTX/ALSRX, ALGTX/ALGRX manual Configuring user-selectable options

The best compensation setting may be set using the following technique.

∙Press {until you observe white trailing edges on the right hand side of black text or graphics.

∙Press and release yseveral times until the white trailing edges just disappear.

STEP 4

Press fto exit from compensation mode.

The AdderLink saves the selected video compensation setting when you exit from compensation mode. This setting is retained within the AdderLink even when the power is off and so unless you change the twisted pair cable you will not need to re- adjust the compensation setting again.

2.9 Configuring user-selectable options

The AdderLink supports a number of user-configurable options that change the detailed operation of the AdderLink to match the required application. These may be selected whilst the AdderLink is in video compensation / configuration mode. Whilst within configuration mode the version number of the AdderLink’s firmware may also be queried.

To enter configuration mode press the HOTKEYS together with f on the keyboard connected to the XR receiver unit. The HOTKEYS are those that were set using the option switches (CTRL + ALT by default).

For example, assuming the default hotkeys, press these keys together :

b a f

AdderLink Installation and Use Page 26