U1 - SmartView channels are switchable using a 3 button mouse or IntelliMouse (default)

(SmartView reports 2 button mouse mode to PCs)

U2 - SmartView channels are not switchable using 3 button mouse or IntelliMouse

(SmartView reports 2 button mouse mode to PCs)

U3 - SmartView channels are not switchable using 3 button mouse or IntelliMouse

(SmartView reports 3 button mouse mode to PCs)

U4 - SmartView channels are switchable using 3 button mouse or IntelliMouse

(SmartView reports IntelliMouse mode to PCs)

U5 - SmartView channels are not switchable using 3 button mouse or IntelliMouse

(SmartView reports IntelliMouse mode to PCs)

4.5 Keyboard hotkey combination

The keyboard hotkey combination is used to change a channel, set autoscan mode or secure the product (so that the password needs to be typed before it can be used again). The following keyboard hotkey combinations can be selected. These hotkey combinations are used together with the command keys to trigger the required SmartView function. The left and right shift key combination is particularly suitable for extended keyboards where additional keys can be programmed to act as a combination of other keys. Such keyboards are supplied with many Gateway 2000 computers. Programming spare keys to trigger the hotkey combination allows channels to be selected via a single key stroke.

H1 - ‘CTRL’ and ‘ALT’ keys together (left or right hand keys operate) (default) H2 - ‘CTRL’ and ‘SHIFT’ keys together (left or right hand keys operate)

H3 - ‘ALT’ and ‘SHIFT’ keys together (left or right hand keys operate)

H4 - ‘RIGHT ALT’ key

H5 - ‘LEFT ALT’ and ‘RIGHT ALT’ keys together

H6 - ‘LEFT CTRL’ and ‘LEFT ALT’ keys together

H7 - ‘RIGHT CTRL’ and ‘RIGHT ALT’ keys together

H8 - No hotkey enabled

SmartView

Installation and Use

Page 24

Page 25
Image 25
Adder Technology SV2, SV4 manual Keyboard hotkey combination