Twisted pair link connections
The links between the LOCAL and REMOTE modules are made using between one and four twisted pair cables, specified to Category 5 or higher.
The various cable connections carry the following channel signals (if particular channels are not used, then corresponding link cables are not required):
Link cable | Channel signals carried |
|
1 | Keyboard, Mouse, Audio, Video 1, Serial 1 | |
Power connection (optional on MS2 model)
The MS2 and MS4 LOCAL modules both have power input sockets. However, only the MS4 model has a mandatory requirement for power input from a supplied adapter. The MS2 LOCAL module requires a separate power input only when the keyboard connection to the host system is not used. Separate power supply units are available from Adder Technology Limited direct (www.shop.adder.com) or from your local supplier - part number:
2 | Video 2, Serial 2 |
3Video 3, Serial 3 (not MS2 model)
4Video 4, Serial 4 (not MS2 model)
IMPORTANT: Ensure that the total twisted pair cable length (including patch boxes) does not exceed 200 metres for any link cable. Ensure that the multiple
1Attach the output connector of the power supply to the socket of the LOCAL module, labelled POWER.
|
|
| 2 |
TO | REMO |
| USEINDOOR |
|
| ONLY | |
| TE |
| |
|
| 1 |
|
|
|
| SERIAL |
|
|
| 1 |
|
|
| PO |
|
|
| WER |
link cables are all of the same length to avoid the risk of uneven delays on video images.
For each required link connection:
LOCAL
1Insert the connector from the twisted pair cable link into one of the sockets (labelled TO REMOTE 1 to
TO REMOTE 4).
2Ensure that the other end of the twisted pair link connects to the corresponding numbered socket on the REMOTE module (labelled TO LOCAL
1 to TO LOCAL 4).
TO |
|
| TE |
| 4 |
TO | SERIAL4 |
| 3 |
| SERIAL |
| 3 |
| 2 |
| SERIAL |
| 2 |
TO | USEINDOOR |
| ONLY |
| 1 |
| SERIAL |
| 1 |
| PO |
| WER |
twisted pair
connections -
cables must beLOCAL of equal lengths
Connection from power adapter:
MS2 model - not required unless the host system keyboard connection is not used (secondary power adapter not supplied)
MS4 model - required in all cases (secondary power adapter supplied)
2Insert the IEC connector of the supplied power lead into the corresponding socket of the power supply. Connect the other end of the power lead to a nearby mains socket.
IEC power connector
10
