Version 3.10E DAS Release Notes 13
21 Dec 2001

ACI Configuration

• Set the environment variable DAS_SERVER correctly. If
using DUALDAS, the variable contains both DAS Server
• Set the DAS_CLIENT environment variable correctly
• Set the ACI_MEDIA_TYPE environment variable
correctly.
New Features in Version 3.10E
DAS 3.10E is required for AMU 3.10E.
The following is a list of new features in this release of the
DAS.
Additional commands in dasadmin 3.10E :
• email (supported only in SDLC systems)
• snmp (supported only in SDLC systems)
PR89 - "'view' at only one drive at once"
There is an additional parameter in listd, listd2, listd3
commands:
dasadmin listd [clientname] [-d drivename]
If "-d" was specified then information will be shown only for
this drive.
PR78 (ET40571) - "Command display foreign
does not exist".
A new command "listf" was introduced to display foreign
volsers.
PR94 - "Multiple pinvt with dasadmin must be
available".
In previous versions only one "pinvt" dasadmin command
could be executed per all dasadmin sessions. Now several
"pinvt" commands can be issued.
PR75 - "DAS doesn't have an interface to return
EIF configuration"
A new dasadmin command "eif_conf" was introduced in DAS
3.10E to display these logical ranges.