•Support a Server Statement in the configuration file to configure:
•Port for DUALDAS
•Retry for dismount
•Timeout for mount and dismount
•Timeout for insert and eject
It is possible to configure a server statement in the following syntax in the DAS configuration file:
server | dualdas_port = port number, |
| retry_keep = retry number, |
| timeout_move = timeout value, |
| timeout_ei = timeout value |
Parameter | Value |
dualdas_port | port number (5000) |
retry_keep | retry number (xx .. yy) |
timeout_move | timeout move (xx .. yy) in seconds for |
| mounts and dismounts. |
timeout_ie | timeout move (xx .. yy) in seconds for insert |
| or eject requests. |
For each change of the timeout value, also set the timeout in the environment variable at the aci to the same value.
timeout_move | ACI_TIMEOUT_MOVE environment |
| variable. |
timeout_ei | ACI_TIMEOUT_EI environment variable. |
•If the error AMU_ERR_MEDIATYPEMISMATCH comes up, the eject returns ENOMATCH.
•If the error AMU_ERR_MEDIATYPEMISMATCH comes up, the insert returns ENOMATCH.
•Additional return values:
ESWITCHINPROGRESSA request was issued during a
switch
EHICAPINUSE | A request was issued during a |
| HICAP request |
ENOPOOL | The specified cleanpool doesn’t exist |
EAREAFULL | The eject area is full (eject cleantapes) |
ENODOUBLESIDE | The volser does not have two sides |
EEXUP | The drive is EXUP for another client |
Version 3.10E DAS Release Notes | 19 |
21 Dec 2001
