ADIC DAS V3.10E manual Corrections in DAS 3.10A

Corrections in DAS 3.10A

Addressed Problem Logs

Table 6	Problems solved with DAS 3.1A
Ticket	Description
Number
- ET51731	A client named ‚AMU' has access to a drive which
	is allocated from ‚AMUCLIENT'
	Output of ‚dasadmin ld' shows ‚clientname EXUP'
	as clientname instead of only the clientname
	Scr_set possible for DTF large medium
- ET56697	Trap at das2 if a '-' was used as volserrange in the
	volser allocation command (allocv)
	Release of LogHandles in ExitList
	Possible to run two aci_function in one process
	under OS/2.
	Changes in socket termination.
	Wrong error codes in response of eject2 for some
	volsers. Each volser has now the correct error
	code.
	No check of media type during the view command
	Wrong response at the command scap with
	parameter ‚-v' if the volserrange was not found
- ET58331	DAS trap with insert2 if cleanpool is longer than
	16 characters
- ET61441	Show command does not show all ranges if the
	Scap command with parameter ‚-v' removed a
	volser range which was placed in the middle of the
	list.

Version 3.10E DAS Release Notes 23

21 Dec 2001