26 Release Notes 603108 Rev A
Addressed Change Requests
The following group of functions were added to provide
information about a single drive. Refer to the DAS Interface
Guide for detailed explanations of the functions.
• aci_drivestatus_one()
• aci_drivestatus2_one()
• aci_drivestatus3_one()
The following function was added to provide information
about a single drive’s serial number. Refer to the DAS Interface
Guide for detailed explanations of the functions.
• aci_drivestatus4_one()
The following group of functions were added to enable large
volser range processing. Refer to the DAS Interface Guide for
detailed explanations of the functions.
• aci_eject3()
• aci_eject3_complete()
The following function was added to provide information
about foreign volsers. Refer to the DAS Interface Guide for
detailed explanations of the functions.
• aci_list_foreign()
The following function was added to provide information
about foreign volsers. Refer to the DAS Interface Guide for
detailed explanations of the functions.
•aci_eif_conf()
The following function was added to provide information
about logical ranges within the Import/Export facility. Refer
to the DAS Interface Guide for detailed explanations of the
functions.
• aci_volser_inventory()
The following function was added to provide enhanced
information about request executions. Refer to the DAS
Interface Guide for detailed explanations of the functions.
•aci_list2()
The following group of functions were added to send email
and snmp messages (suppported only by the Scalar DLC
software). Refer to the DAS Interface Guide for detailed
explanations of the functions.
•aci_email()
•aci_snmp()