19
Document # 50075 Rev B 3/13/95
Valid entries for both the primary and secondary phone numbers are 0 - F with the
numeric digits as dialed numbers and hexadecimal digits (A-F) representing the
following functions:
A= * on a Touchtone phone keypad
B= # on a Touchtone phone keypad
C= look for secondary dial tone for up to 2 seconds (then, dial anyway)
D= 3-second pause
E= 5-second pause
F= end of phone number (Note: F must be entered)

Note: The UNI•COM automatically programs all of the event codes. See

Tables 3-2 and 3-3.

Primary Number Communication Format (16)
One location is needed to select the Communication Format to the primary phone
number. Address 16 is used for this purpose. The default (factory setting) for this
address is '0' and cannot be changed. The format is ADT FSK II.
Primary Number Account Code (17-19) Three locations at addresses 17-19 default
to all '0's. Valid entries are 0-9.
Primary Number 24 Hour Test Time (20-23).
Use military time when entering the 24 hour 'test' time. The 24 hour test report to
phone number 1 takes up four locations, from addresses 20-23. The default is 00:00
(12:00 midnight). The limits for each location are as follows: 20: enter 0, 1 or 2;
21: enter 0-9; 22 : enter 0-5; 23: enter 0-9. Note: Do not use A-F.
Primary Number 24/12 Hour Test Time Interval (24). The test report sent to the
Primary phone number may be sent every 12 or 24 hours. If the message is to be sent
every 24 hours, leave the factory default entry of zero. If 12 hour test report time is
needed, enter 1=12 hours.
Secondary Phone Number (25-40). Programming is similar to programming the
primary phone number located at addresses 00 - 15. The defaults are also all 'F's.
F F F F F F F F F F F F F F F F
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
Secondary Number Communication Format (41). Programming is the same as the
primary number's Comm Format at address 16. Default entry is '0', ADT FSK II.
Secondary Number Account Code (42-44) is programmed in addresses 42 - 44 in
the same manner as the primary phone number Account Code. Default entries are all
'0s'.
Secondary Number 24-Hour Test Time (45-48) is programmed in addresses 45-
48 in the same manner as the primary number 24-Hour Test Time. Default is 00:00
(12:00 midnight).