ADT Security Services 50075 1.2 Controls and Indicators

8 Document # 50075 Rev B 3/13/95
Front Panel Switches
CLEAR Digits 0-9
TEST A
MODE B
Up Arrow C
Down Arrow D
1st EVENT E
ENTER/STORE F
Displays
• EIA-485 - yellow LED
• COMM. FAIL - yellow LED
• KISS OFF - green LED
• POWER - green LED
• Four, Seven Segment Displays -
red
• Primary Phone Line Active - red
LED
• Secondary Phone Line Active - red
LED
• TEST - green LED
• MODEM - green LED
The UNI•COM has been designed to be compatible with a variety of ADT fire alarm
control panels (refer to Appendices).
Two modular phone jacks allow easy connection to telephone lines. Modular jacks
are labeled PH1 and PH2 for the Primary and Secondary phone lines. Telephone line
'Primary and Secondary Active' red LEDs are provided as well as a green 'Kissoff'
LED. The integral digital communicator provides the following functions:
• Line Seizure - takes control of the phone lines disconnecting any premises
phones.
• Off/On Hook - perform on and off-hook status to the phone lines.
• Listen for dial tone - 440 hertz tone typical in most networks.
• Dialing the central station(s) number - default is Touch-Tone®, programmable
to rotary.
• Discern proper synchronization with UCS receiver.
• Transmit data to UCS receiver.
• Verify data has been accepted by the UCS receiver.
• Hang up and release phone lines.
• Communicate in the ADT FSK II format (refer to Section 5.0 for compatible
receivers):
Figure 1-2: Controls and Indicators
1.3 Compatible
Panels
1.4 Digital
Communicator
1.2 Controls and
Indicators